Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Crown Heights
If you own or manage a brownstone or rowhouse in Crown Heights, your chimney is probably older than the boiler it now vents. We work on chimneys across the neighborhood, from the blocks near Eastern Parkway to the limestone rows off Nostrand Avenue, and we know what century-old masonry does when it’s asked to serve modern gas equipment through a shared stack. Call (855) 337-1157 and we’ll book a sweep or inspection and give you a flat price agreed before we start. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Crown Heights Homeowners Call Chimney Sweep Bushwick for Chimney Repair
Most Crown Heights chimney work isn’t about wood smoke anymore. It’s about unlined or clay-tile flues in 1890s-1930s brownstones and limestone rowhouses, many converted from coal to gas decades ago, now venting boilers and water heaters these stacks were never built for. That’s the diagnosis we start every job with: inspection first, always.
We carry the toolkit for actual repair, not just sweeping: HeatShield resurfacing to restore flue integrity without full demolition, DuraFlex flexible liners for minimally invasive relining, and Olympia Chimney caps and structural components. When mortar is failing, we repoint. When brick is spalling, we repair. Cap, crown, liner, flue, firebox: every part of your chimney system, one company. Our technicians have up to 10 years of experience, and we’re licensed and insured as the state requires for the local pros we connect you with.
From inspection to repair, handled by the same specialist crew. No referrals, no handoffs, and no recommendation you can’t verify on camera footage we show you before any work is proposed.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Crown Heights
The repairs that come up most in Crown Heights all trace back to age and moisture. Here’s what we handle most often on the neighborhood’s attached rowhouse and brownstone chimneys.
Mortar Repointing in Crown Heights
Freeze-thaw cycles hammer exposed chimney tops here through the cold Northeast winters, and mortar joints are usually the first thing to go. When joints crumble, water gets in and the damage spreads down the stack. Repointing replaces that failed mortar with fresh material matched to the original brick, before a small joint problem becomes a structural one.

Spalling Brick Repair in Crown Heights
Spalling is what happens when water soaks into brick and freezes: the face pops off in flakes and chunks. On century-old brownstones with original brick chimneys, spalling climbs fast once it starts. We replace damaged units and address the moisture source behind the spalling, because patching brick without fixing the water is a waste of money.

Chimney Waterproofing in Crown Heights
Summer humidity sits in these unlined masonry flues and works on them quietly until the first hard cold snap stress-tests the stack. A breathable waterproofing treatment on the exterior masonry keeps bulk water out while letting the brick dry from the inside. It’s the cheapest repair on this list and the one that prevents the rest.

Flashing Repair in Crown Heights
Where the chimney meets the roof, flashing is supposed to keep water out. On old Crown Heights rowhouses, original flashing is often corroded or was never correctly installed after a roof repair. Failed flashing shows up as damp ceiling patches or staining below the roofline, and it’s a straightforward fix once we’ve traced the actual leak path with a proper inspection.
Trusted Brands We Service in Crown Heights
We work with professional-grade materials, not off-the-shelf substitutes: DuraFlex for flexible liner installation, HeatShield for flue resurfacing, and Olympia Chimney for caps and structural components. Because the local pros we connect you with complete the diagnosis and the repair on the same visit, there’s no waiting on a separate vendor for parts. You get one crew, one scope of work, and a finish built to last.
Common Chimney Repair Problems We See in Crown Heights Homes
- Cracked clay tile liners in stacks built for coal, now venting gas boilers. These flues were never designed for the moisture and temperature profile of modern gas equipment, and decades of it leave them spalled and cracked.
- Freeze-thaw damage to mortar joints and crowns on exposed chimney tops. The Northeast winter cycle attacks the most exposed part of the stack first, and water gets in through every failed joint.
- Moisture damage in unlined flues that goes unnoticed until winter. Summer humidity sits in the masonry through the warm months, and the real damage surfaces the first time the heating system runs hard in November.
- Failed flashing at the roof-chimney junction. Old Crown Heights rowhouses often have flashing that’s been patched repeatedly without ever solving the underlying leak.
Pricing for Chimney Repair in Crown Heights, NY
Typical chimney repair in Crown Heights runs from a few hundred dollars for repointing or crown sealing up to the low thousands for a full liner repair or rebuild on a deteriorated stack. The written estimate sets the final price, and we agree it before we book the work.
| Repair | Typical Range in Crown Heights |
|---|---|
| Mortar repointing (spot repair) | $350 – $750 |
| Spalling brick repair | $400 – $900 |
| Chimney waterproofing | $250 – $550 |
| Flashing repair | $300 – $650 |
| Relining (DuraFlex or HeatShield, per flue) | $1,800 – $4,200 |
What moves the number: how much brick has spalled, whether one flue or the whole shared stack needs work, and how accessible the chimney top is. Call (855) 337-1157 for an exact quote. Estimates are free.
See the difference
Before
After
Before
After
Before
AfterA Shared Stack Problem That’s Specific to Crown Heights
In Crown Heights’s attached rowhouse blocks, a chimney is rarely solo. One stack often serves three or four units’ boiler flues through shared party walls. That changes how a repair has to be handled. If a flue is deteriorating and no one inspects the whole stack, a repair on one side can push moisture or carbon monoxide into a neighbor’s apartment through the party wall. Coordinating with neighbors is part of the job here, not an afterthought, and it’s why we recommend a Level 2 inspection with camera access before anyone touches the masonry.
A typical Chimney Repair call in Crown Heights starts when a homeowner notices damp patches on a ceiling or a boiler that struggles to draft. The cause is often a deteriorated clay tile liner or spalling brick somewhere in the shared stack, hidden behind the cornice. A qualified local pro runs the inspection, shows the homeowner the footage, then recommends targeted tuckpointing, liner repair, or crown sealing, coordinating with neighbors when the stack is shared.
We Also Serve Cities Near Crown Heights
We work in Crown Heights and the surrounding neighborhoods: East Flatbush, Williamsburg, Prospect Heights, and Bedford-Stuyvesant. If you’re nearby and wondering whether we cover your block, call and ask. Whichever side of the boundary you’re on, the same inspection-first approach applies.
Serving Crown Heights, NY – Our Local Coverage Area
We serve Crown Heights and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Crown Heights
Responsibility usually falls on the owner of the flue that’s damaged, but the party wall and shared structure can complicate it, so check your deed and any building agreements before committing to work. Practically, the repair still needs to address the whole shared stack to prevent cross-contamination between units. Call (855) 337-1157 for an inspection that maps which flues serve which units.
If you notice damp patches, crumbling mortar visible from the roofline, a boiler that drafts poorly, or spalling brick, that’s a repair signal, not a cleaning one. A standard sweep won’t catch a cracked liner or failed flashing; a Level 2 inspection with a camera will. We’ll show you the footage and tell you plainly what needs work now and what can wait. Call (855) 337-1157 to book one.
Yes, if your chimney vents a gas boiler or water heater, which is common in converted Crown Heights brownstones. A deteriorated flue serving a boiler can leak combustion gases into your apartment or a neighbor’s through the shared stack, and that risk doesn’t go away because the fireplace is unused. Call (855) 337-1157 and we’ll inspect the flue your heating equipment actually uses.
Tuckpointing and repointing both replace failed mortar between bricks; tuckpointing adds a finish that gives a finer, more uniform look. Functionally, either can restore weather resistance to a chimney joint, and the choice often comes down to the appearance of the original masonry. We’ll tell you which fits your Crown Heights brick and why. Call (855) 337-1157 for a free estimate.
No. Nothing is recommended without camera evidence you can see for yourself. That’s the direct answer, and it’s deliberate. Crown Heights has plenty of century-old masonry stacks that invite unnecessary liner and rebuild quotes, and the only way to know what’s actually wrong is to look inside the flue and show you what we found. Call (855) 337-1157 to schedule an inspection.
Book Chimney Repair in Crown Heights
If the stack above your Crown Heights rowhouse hasn’t been inspected since the last boiler service, that’s the place to start. Call (855) 337-1157 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. From inspection to repair, handled by the same specialist crew, with the flat-price estimate agreed before we book.
Written by the team at Chimney Sweep Bushwick.