Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Bushwick
If you live in one of Bushwick’s brick walk-ups or row houses, your chimney top is probably older than the building’s wiring and shared with at least one neighbor. We’re a chimney and fireplace specialist, and cap and crown work is what we do: capping flue openings, rebuilding cracked crowns, and coating brick that has gone decades without a drop of mortar. Our technicians have up to 10 years of experience, and we know what a Bushwick chimney top actually looks like up close: shared stacks, coal-era flues, and crowns that have quietly failed along the party wall.
Every job starts with an inspection and a written flat-price scope agreed before we book. Nothing gets recommended without evidence you can look at yourself. Call (855) 337-1157. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Bushwick Homeowners Call Chimney Sweep Bushwick for Chimney Cap & Crown
We work in Bushwick constantly, and that matters here more than in most neighborhoods. The housing is dense: three- to five-story brick walk-ups from the 1880s to the 1920s, attached rowhouses, and chimney tops that serve more than one unit. You can’t scope a cap job from inside a single apartment. The crown and its flue openings belong to every unit venting into that stack, so the right fix is usually a multi-flue cap sized to the whole chimney top, not a single-flue cover slapped over one opening. Getting that wrong leaves a neighbor’s flue exposed.
We diagnose before we recommend, always. A Level 1 or 2 inspection of the full stack tells us which flues are abandoned coal flues, which now vent a gas boiler or water heater, and whether an adjoining unit shares the stack. That inspection comes with a camera report and photos, so you’re never taking our word for a repair you can’t verify. The local pro who performs the work is licensed and insured as their state requires.
We serve Bushwick street by street, from the tight blocks near Maria Hernandez Park to the wide stretches off Knickerbocker Avenue. Tight roofs and shared stacks are the norm here, and we plan access accordingly.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Bushwick
Cap Installation
A properly fitted cap keeps rain, birds, and squirrels out of a flue that’s otherwise wide open to the sky. In Bushwick’s dense walk-ups, installation means measuring every opening on the stack first, since a cap that fits one flue often leaves the neighbor-serving openings uncovered. We fit caps from Famco and Olympia Chimney, sized to the actual chimney top rather than to a standard single-flue size.

Cap Replacement
Storm-driven rain and years of freeze-thaw work a cap loose, and a rusted or tilted cap does more harm than good once it’s off its seat. We replace caps on Bushwick rowhouse stacks where the old cover was sized for a single flue and never belonged on a multi-flue top. Expect a fresh, correctly fitted cap that covers every opening on the stack.

Crown Repair
The mortar crown is the flat top that sheds water away from the brick, and in Bushwick it’s usually the first thing to fail along a party wall. When a crown cracks, freeze-thaw water gets into the brick and down an unlined flue, showing up later as spalling brick and damp on an interior wall. We rebuild crowns to shed water properly and break the cycle before the brick takes more damage.

Crown Coating
Not every crown needs a full rebuild. A crown that’s still structurally sound but cracked at the surface can often be coated to seal it against water intrusion, a lighter-touch repair that fits older Bushwick brick. We assess the crown honestly first and tell you plainly when a coating will hold and when a rebuild is the only thing that lasts.
Trusted Brands We Service in Bushwick
We work with professional-grade materials, not whatever’s cheapest at a hardware store. For caps and venting we use Famco and Olympia Chimney products, and our HeatShield resurfacing capability lets us restore flue integrity without full demolition where that’s the right call. DuraFlex flexible liner systems are in our toolkit for minimally invasive relining. We don’t claim to stock these locally, but we know them well and specify them for Bushwick jobs where they fit. We diagnose before we recommend, and we’ll tell you when a repair can safely wait.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in Bushwick Homes
- Deferred mortar on shared party-wall crowns. Decades of skipped maintenance let water into shared stacks, so one unit’s spalling brick becomes a damp problem for the adjoining rowhouse. The fix usually runs across both properties, which is why we inspect the whole stack first.
- Single-flue caps on multi-flue tops. A cap sized for one flue gets fitted to a Bushwick chimney top that serves several openings, leaving neighbor-serving flues uncovered and exposed to Nor’easter rain. Multi-flue sizing is the answer on attached housing.
- Repurposed coal flues with no liner. An abandoned coal flue serving a gas boiler or water heater has no flue liner, so capping it without checking first seals a stack that’s already a CO cross-contamination hazard between units. Inspection comes before any cap goes on.
- Crowns cracking fast along the party wall. The joint where two rowhouses meet is where water pools and freeze-thaw does its worst, cracking the crown from the seam outward. Rebuilding or coating the crown properly is what stops the cycle.
Pricing for Chimney Cap & Crown in Bushwick, NY
Here’s what cap and crown work typically runs on Bushwick’s dense brick housing. A typical single-flue cap installation runs $250 to $550. A multi-flue cap sized to a shared Bushwick stack runs $450 to $900, since it has to cover every opening. Crown repair, rebuilding the mortar top, runs $400 to $1,200, and crown coating runs $300 to $800. What moves the number is stack size, roof access on a tight street, how many flues need covering, and how much of the crown is actually failed versus surface-cracked. The written estimate you get before booking is the final price, and the estimate itself is free.
We Also Serve Cities Near Bushwick
We work across the surrounding neighborhoods too: Bedford-Stuyvesant, Glendale, Ridgewood, and Williamsburg. The same shared-stack, party-wall housing patterns show up in all of them, so the approach doesn’t change when we cross the neighborhood line. If you’re near any of these and want a cap or crown assessment, our chimney cap & crown team can book an inspection.
Serving Bushwick, NY – Our Local Coverage Area
We serve Bushwick and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Bushwick
The cost is usually shared, because the crown and its flue openings serve every unit venting into that stack, so a repair that only covers one side doesn’t actually fix the leak. In practice, an inspection of the whole stack shows which openings and which adjoining unit are involved, and that report is what lets owners split the work fairly. Call (855) 337-1157 for an exact scope and estimate. Estimates are free.
Not without an inspection first, because an abandoned coal flue serving a gas appliance with no liner is already a CO cross-contamination hazard between units, and capping it blind just seals that in. The right move is to confirm what’s venting where and whether the flue is lined before any cap goes on. Call (855) 337-1157 and we’ll book a proper inspection. Estimates are free.
Mainly because they’ve gone decades without mortar work and sit right where freeze-thaw water pools along the party wall, cracking the crown from the seam outward. The Atlantic-driven freeze-thaw cycles and Nor’easters push water into small cracks, and the long idle periods between heating seasons give the damage time to spread. Call (855) 337-1157 and we’ll assess whether your crown can be coated or needs a rebuild. Estimates are free.
Usually yes, because most Bushwick stacks are shared party-wall chimneys serving several units, and a single-flue cap leaves the neighbor-serving openings uncovered and exposed to rain. A multi-flue cap sized to the whole chimney top covers every opening at once. Call (855) 337-1157 to have the stack measured. Estimates are free.
Yes, and often more so than an active one, because a flue that never gets used is exactly where an illegal or repurposed vent hides and where a cracked crown quietly lets water into the brick. Even without a fire, the stack still sheds rain and still serves whatever appliance vents into it. Call (855) 337-1157 to book an inspection with a camera report and photos. Estimates are free.
Whether you’re in a brick walk-up off Knickerbocker Avenue or a rowhouse near Maria Hernandez Park, a shared stack means the cap and crown work has to cover the whole chimney top. We’ll inspect the full stack, show you the photos, and give you a written flat-price scope before anything is booked. Nothing gets recommended without camera evidence you can see, and we’ll tell you plainly when a repair can safely wait. Call (855) 337-1157 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Bushwick.