Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Bedford-Stuyvesant
If you own a rowhouse or brownstone in Bedford-Stuyvesant, your chimney crown and cap are the two parts of the system taking the most weather with the least protection. We handle the work across Bedford-Stuyvesant, from quick cap replacements to full crown rebuilds on stacks rising off shared masonry party walls. Our technicians have up to 10 years of experience, and we work with professional-grade materials rather than off-the-shelf substitutes. Call (855) 337-1157. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Bedford-Stuyvesant Homeowners Call Chimney Sweep Bushwick for Chimney Cap & Crown
The chimneys here are old in a particular way. We know that most of Bedford-Stuyvesant’s housing stock went up between the 1880s and 1910s, that original coal-era flues were often never relined when fireplaces were converted to gas, and that a lot of these stacks sit on masonry party walls shared with a neighbor. That changes the work. A crown rebuild that would be routine on a detached house can stall the moment scaffolding has to cross a property line.
We diagnose before we recommend. Every job starts with an inspection and camera evidence you can see for yourself, so if we tell you a crown needs a full rebuild rather than a coating, you know exactly why. No handoffs, no upselling you into liner work you don’t need. Cap, crown, liner, flue, firebox: every part of your chimney system, handled by the same specialist crew.
Bedford-Stuyvesant sits between Bushwick and Crown Heights with Prospect Heights to the south, and we’re in the neighborhood regularly for this kind of work. Call (855) 337-1157 for a free estimate.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Bedford-Stuyvesant
Cap Installation in Bedford-Stuyvesant
A properly sized cap keeps rain, squirrels, and nesting birds out of flues that are often unused for months at a stretch. On a Bedford-Stuyvesant brownstone with multiple flues in one stack, that means fitting a cap sized to the actual stack rather than forcing a single-flue unit over several openings. We work with Famco and Olympia Chimney components, and we check the flue count before anything gets ordered.

Cap Replacement in Bedford-Stuyvesant
Old caps rust, warp, and pull loose at the mounting straps, and a loose cap on a tall Bedford-Stuyvesant stack is a wind problem waiting to happen. We remove the failing unit, inspect the flue edges beneath it, and fit a replacement before the rain season. If the crown underneath is already spalling, we’ll show you on camera rather than just capping over a problem.

Crown Repair in Bedford-Stuyvesant
The crown is the concrete or masonry cap at the top of the stack that sheds water away from the brick below. When it cracks, meltwater seeps into the masonry and travels down along the flue. On Bed-Stuy’s freeze-thaw winters that’s what turns a hairline fissure into spalled brick and crumbling mortar joints. We rebuild crowns with HeatShield resurfacing where the structure underneath is sound, so you’re not paying for demolition you don’t need.

Crown Coating in Bedford-Stuyvesant
A coating makes sense when the crown is intact but the surface has broken down enough to soak up water. It doesn’t make sense when the crack goes deeper than the surface, which is the trap we see most: a thin mortar skim over a failing crown that traps moisture and speeds up the spalling underneath. We check the depth before we recommend either approach. Crown coating is a real repair for the right crown and a waste of money on the wrong one.
Trusted Brands We Service in Bedford-Stuyvesant
We work with DuraFlex flexible liner systems, HeatShield resurfacing, Gelco, Olympia Chimney, Famco, and Copperfield. These are professional-grade products, and they matter for cap and crown work specifically. A cap that fits and sheds properly and a crown built to move with the masonry through a Brooklyn winter hold up far longer than a generic replacement. We don’t claim to stock parts in Bedford-Stuyvesant, but we can order the right component for your stack and get it fitted without delay.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in Bedford-Stuyvesant Homes
- Crowns cracked along the party-wall line. Original coal-era crowns were often poured without expansion joints, and on a shared party-wall stack they crack right along that seam. Cold Northeast freeze-thaw cycles take a hairline fissure and widen it into spalled brick over a few winters.
- A single-flue cap jammed over a multi-flue stack. When a stack has several flues and someone fits a cap sized for one, the screening doesn’t cover the openings properly. Squirrels, rain, and debris get into unused flues that were never relined after gas-log conversion.
- Thin skim-coat crown “repairs.” A decaying crown on a party-wall stack gets covered with a thin mortar layer that traps moisture instead of shedding it. The spalling accelerates underneath and the real rebuild, plus the neighbor’s consent, gets postponed further.
- Spalling brick and eroded mortar at the roofline. Years of damp winters eat away at the mortar joints above the roofline first, and a crown that’s letting water through makes it worse. On an unlined flue, that moisture works its way inside too.
Pricing for Chimney Cap & Crown in Bedford-Stuyvesant, NY
Cap and crown work in Bedford-Stuyvesant runs roughly as follows. These are typical estimates for the market, and the written estimate after inspection sets the final price. Nothing gets recommended without camera evidence you can see, and we’ll tell you plainly when a repair can safely wait.
- Standard single-flue cap installation: $180 to $350
- Multi-flue cap sized to the stack: $350 to $750
- Crown coating: $250 to $550
- Crown repair or rebuild: $600 to $1,800
- Custom cap fabrication: $700 to $1,500
A crown rebuild on a shared party wall can run higher because of the coordination it requires. Estimate is free. Call (855) 337-1157.
We Also Serve Cities Near Bedford-Stuyvesant
We work across the surrounding blocks too, from Williamsburg to Bushwick to Crown Heights and Prospect Heights. If you’re on the edge of Bedford-Stuyvesant and not sure which side of a boundary line you fall on, call us and we’ll sort it out. The same cap and crown work applies block to block, and the same party-wall considerations tend to follow.
Serving Bedford-Stuyvesant, NY – Our Local Coverage Area
We serve Bedford-Stuyvesant and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Bedford-Stuyvesant
Usually yes for a cap, but often no for a crown rebuild. A cap is fitted from your side of the stack and doesn’t require access across the property line. A crown rebuild often needs scaffolding or masonry work that crosses onto the adjoining rowhouse, and on a party-wall stack your neighbor’s written consent is usually required before we start. We identify that early, before you’ve committed to anything. Call (855) 337-1157 for an exact quote – estimates are free.
It comes down to how deep the damage goes. A crown with surface breakdown but a solid core is a candidate for coating; one with cracks running through the body needs repair or a rebuild. We check the depth on site and show you what we’re seeing. If a coating would only trap moisture, we’ll tell you, and if the crown can safely wait another season, we’ll tell you that too. Call (855) 337-1157 for an exact quote – estimates are free.
Yes, and it’s one of the most common situations in Bedford-Stuyvesant. An original coal flue that was never relined when the fireplace was converted to gas logs won’t be sized right for that appliance. It affects which cap fits safely, how the flue drafts, and whether the crown rebuild should include any relining. We inspect the flue with a camera before recommending anything. Call (855) 337-1157 for an exact quote – estimates are free.
Plenty, even if you never burn. A decorative fireplace still has a chimney stack, and that stack still lets weather in through the top. An open flue without a cap lets rain down the shaft and lets squirrels and birds nest inside. A properly fitted cap stops all of that and cuts down on the draft of cold air into the room. It’s the cheapest protection you can put on a brownstone chimney. Call (855) 337-1157 for an exact quote – estimates are free.
Cold, damp Northeast winters with repeated freeze-thaw cycles break down exposed crowns, mortar, and brick above the roofline. Water gets into a hairline crack, freezes, expands, and widens it further, so every winter makes the damage worse. If your crown was originally poured without expansion joints, it’s especially prone to cracking along the party-wall line. A rebuild done right, with room to move, breaks that cycle. Call (855) 337-1157 for an exact quote – estimates are free.
If your Bed-Stuy chimney crown is spalling, your cap is loose, or you just want to know whether either one needs attention, call (855) 337-1157 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’ll show you the camera footage, explain what’s actually wrong, and tell you plainly when a repair can wait. Our cap and crown team handles the whole job, and every other part of your chimney system besides, from the same specialist crew.
Written by the team at Chimney Sweep Bushwick.