Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Prospect Heights
Prospect Heights roofs are tight, and the chimneys on them are older than almost anything else up there. If your cap is loose, missing, or rusted through, or your crown has cracked enough to let water into the brick, we can help. We’re a chimney-and-fireplace specialist, not a general handyman outfit, and we work these blocks of brownstone Brooklyn routinely. Call (855) 337-1157 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Cap and crown work in Prospect Heights is rarely just a cap and crown job. On an attached rowhouse, the top of your chimney is often the top of somebody else’s chimney too, and that changes how the work has to be planned.
Why Prospect Heights Homeowners Call Chimney Sweep Bushwick for Chimney Cap & Crown
We specialize in chimney and fireplace systems only. That focus matters here, where the housing stock punishes guesswork. Most of the rowhouses around Vanderbilt Avenue and along the side streets off Flatbush were built between the 1880s and the 1910s, with original brick chimneys and aged terracotta flues that crack and spall. A crew that mostly installs caps on new construction will misread what they’re standing on.
Our technicians have up to 10 years of experience, and we diagnose before we recommend. That means an inspection first, always, with photos you can look at yourself before anyone proposes a repair. We work with professional-grade materials from a vetted brand portfolio, including Olympia Chimney, Famco, and Copperfield, rather than whatever’s cheapest on a shelf.
We know Prospect Heights specifically: the party-wall stacks, the landmark-preservation constraints that shape what can be changed on a visible roofline, and the way a job here needs a conversation with the neighbor before ladder work starts. That local knowledge is the difference between a cap that vents correctly and one that quietly backdrafts a flue next door.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Prospect Heights
Cap and crown work is moisture defense. Water is the leading cause of long-term chimney deterioration, and in brownstone Brooklyn most of it arrives through the top. Our chimney cap & crown team handles the full range below.
Cap Installation in Prospect Heights
A correctly sized cap keeps rain, birds, and debris out while letting the flue breathe. On Prospect Heights rowhouses, sizing is the whole job: a cap that’s too tight chokes draft, and one that’s too loose lets chimney swifts nest in unused flues. We fit stainless and copper caps matched to the flue count and the appliance actually venting into the stack.

Cap Replacement in Prospect Heights
Older caps rust out at the seams and fasteners, and the failure is usually invisible from the street. If your cap sits loose in a nor’easter or you can see daylight where the mesh has gone, replacement is straightforward. We remove the old unit, check the flue tile beneath it for damage, and set a new cap with proper clearances.

Crown Repair in Prospect Heights
The crown is the sloped concrete or mortar cap at the very top of the brick. When it cracks, water tracks down into the shared party-wall brickwork, and that spalling and mortar loss can compromise adjacent flues, not just yours. We rebuild crowns with a proper slope to shed water, matching the original profile where landmark rules require it. Read more on our Prospect Heights page about how we coordinate these jobs.

Crown Coating in Prospect Heights
Where the crown is cracked but structurally sound, a flexible coating can seal it without a full rebuild. This is a judgment call, and we make it with photos in hand. Coating a crown that’s already failing underneath just traps the problem, so we won’t recommend it where a rebuild is the honest answer.
Trusted Brands We Service in Prospect Heights
We’re authorized to work with six professional-grade industry brands: DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. For cap and crown work, that means Olympia Chimney and Famco components for caps, venting, and structural pieces, plus Copperfield where a custom cap is the right fit for an odd flue arrangement. We don’t claim to keep parts stocked on a truck or in a local warehouse. What we do is specify the right component for the flue in front of us and get it moving, so a straightforward cap or crown job doesn’t stall waiting on the wrong part.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in Prospect Heights Homes
- Crown cracks from freeze-thaw cycles. Brownstone Brooklyn’s humid winters push water into hairline cracks, freeze it, and widen it. Come spring, that crack is letting water into shared party-wall brickwork, and the spalling can block an adjacent flue.
- Missing or undersized caps on unused flues. Plenty of these chimneys were converted to gas or oil, leaving dead flues that still collect debris. Uncapped, they become chimney swift nests and draft problems for every unit on the stack.
- Corroded flashing at a shared base. Water staining on an interior wall often gets blamed on the crown. Sometimes it’s the flashing where two rooflines meet the same chimney, and it tracks into both properties until someone gets up there and looks.
- Decades of soot mixed with fallen brick. In shared stacks, loose mortar and brick from one flue lands in another. It’s a blockage you can’t see from below and a good reason to inspect before capping anything.
Pricing for Chimney Cap & Crown in Prospect Heights, NY
Here’s what cap and crown work typically runs in the Prospect Heights market. These are estimates, and the written estimate sets the final price.
| Service | Typical Estimate |
|---|---|
| Standard cap installation (single flue) | $225 – $450 |
| Multi-flue cap (shared stack) | $450 – $900 |
| Custom or copper cap | $600 – $1,200 |
| Crown coating | $350 – $700 |
| Crown rebuild | $700 – $1,600 |
Cost moves with flue count, roof access, and whether the crown needs a rebuild or just a coating. A shared stack on a tight block takes more coordination than a single flue on a detached house, and that’s reflected in the range. We give a flat price for the sweep and the inspection agreed before booking, the inspection includes a camera check and a photo report, and the estimate itself is free.
We Also Serve Cities Near Prospect Heights
We work across the surrounding neighborhoods as well: Clinton Hill, Fort Greene, Williamsburg, and Crown Heights. The housing stock is similar, and the party-wall conditions are just as common a block over. If you’re outside Prospect Heights, tell us where you are when you call and we’ll confirm coverage.
Serving Prospect Heights, NY – Our Local Coverage Area
We serve Prospect Heights and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Prospect Heights
Yes, if the cap is sized and vented correctly for every flue in the shared stack. A single rowhouse chimney can serve multiple units, and a cap that covers all openings while letting each flue vent independently is the right solution. The coordination is the hard part: access, timing, and confirming what each unit is actually venting. We plan that with both sides before any ladder goes up. Call (855) 337-1157 for an exact quote; estimates are free.
Because your crown sits on 1880s to 1910s brickwork in a humid, freeze-thaw climate that works on it every winter. Water gets into a hairline crack, freezes, expands, and the crack grows, and exposed crowns on these older chimneys deteriorate faster than the poured caps on newer construction. Spring inspections here regularly turn up cracks that let water in during nor’easters. Call (855) 337-1157 to get yours looked at.
A loose cap, visible rust at the seams and fasteners, torn mesh, or daylight showing through the screen all point to replacement. From the street you’ll often just notice the cap sitting crooked or missing entirely. Inside, draft problems or debris in a flue that should be closed off are the other tell. Call (855) 337-1157 and we’ll confirm from the roof.
A coating can fix a crown that’s cracked but structurally sound; it can’t fix one that’s already failing underneath. Spalling brick and mortar loss below the crown is a different problem than a surface crack, and coating over it traps moisture rather than keeping it out. This is why we inspect with a camera and show you the photos before recommending anything. Call (855) 337-1157 for a free estimate.
Once a year if you burn regularly, and at minimum before each heating season. On a shared stack, an annual look catches crown cracks, cap damage, and blockages in dead flues before they turn into a problem for the unit next door. It’s also the cheapest way to know whether a repair can safely wait. Call (855) 337-1157. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
If your cap is loose or your crown has seen better winters, call (855) 337-1157 for a free estimate. We’ll get up on the roof, show you what we find, and tell you honestly whether it can wait. From inspection to repair, handled by the same specialist crew.
Written by the team at Chimney Sweep Bushwick.