Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Crown Heights
Crown Heights is full of chimney tops that were never built for what’s venting through them now. Most of the brownstones and limestone rowhouses on these blocks went up between roughly 1890 and 1930 with clay tile liners, and then the buildings switched from coal to gas. The flues stayed. The appliances changed. That’s the situation we work with every week on the streets off Eastern Parkway and along Nostrand, and it’s why a cap and crown call here is usually a venting inspection wearing a hat. Call (855) 337-1157 to book a Crown Heights sweep and inspection.
Why Crown Heights Homeowners Call Chimney Sweep Bushwick for Chimney Cap & Crown
We’re a chimney and fireplace specialist, not a generalist outfit that adds chimneys to a longer list. Cap and crown work is one of our five core services, alongside sweep, repair, fireplace repair, and standalone inspection. The inspection comes first here. Nothing gets recommended until a camera has been through the flue and you’ve seen the footage yourself.
Our technicians have up to 10 years of experience, and we work with a vetted brand portfolio: DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. That means professional-grade caps and coatings, not whatever a hardware store had on the shelf. We know the attached rowhouse layout in Crown Heights well enough to tell you before we arrive whether your stack is a solo or a shared one, because that single question changes what the job looks like.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Crown Heights
Cap and crown are two different parts doing two different jobs. The crown is the mortar cap at the top of the stack that sheds water away from the flue. The chimney cap sits above it and keeps rain, birds, and debris out of the opening. Both matter more in this housing stock than most people realize, and both are part of our chimney cap & crown work.
Cap Installation
A properly sized cap is the cheapest moisture defense a Crown Heights chimney has. On a shared party-wall stack, it also protects the flues of the neighbors you’re attached to. We size the cap to the flue, not to a guess, and we fit a spark arrestor and animal screen as part of the install.

Cap Replacement
Loose or missing caps are common on these 1890s – 1930s tops, where freeze-thaw has worked on the masonry anchors and the original hardware. A loose cap lets rain and birds straight into the flue. We pull the old one, check the masonry it was anchored to, and set a new cap on sound footing.

Crown Repair
When the crown has spalled and cracked, water gets behind it and starts degrading the clay tile joints below. On Crown Heights rowhouses, a crown repair typically includes rebuilding the wash so it drains properly away from the flue. We use HeatShield and compatible sealing materials so the repair moves with the masonry instead of cracking off again.

Crown Coating
A crown that’s intact but porous can often be coated rather than rebuilt. A flexible sealant coating closes the surface against rain while letting the masonry below breathe. That’s the less invasive option, and it’s worth asking about before anyone quotes you a full crown rebuild.
Trusted Brands We Service in Crown Heights
Cap and crown jobs here lean on Famco and Olympia Chimney for caps, venting, and structural components, and on HeatShield when the flue needs resurfacing rather than replacement. DuraFlex comes in when a liner run is part of the fix. We don’t stock parts; we specify materials for the job in front of us and source them against the written estimate. That keeps the turnaround honest and the materials matched to your chimney, not to whatever happened to be on a shelf.
Common Chimney Cap & Crown Problems We See in Crown Heights Homes
- Cracked, spalled crowns on century-old brick. Freeze-thaw cycles on an exposed stack top will open up mortar joints over the decades. Once the crown cracks, water runs behind it and starts working on the liner joints below.
- Clay tile liners sized for the wrong appliance. Flues built for coal are often too large for modern gas boiler exhaust, which lets exhaust cool and condense on the tile. That condensation eats mortar joints over time, and a cap alone won’t fix it.
- Shared party-wall stacks with one missing cap. In attached rowhouses, a loose cap on one unit lets rain, birds, and debris into the common chimney. That’s a moisture and draft problem for more than one apartment.
- Cornices hiding the crown from the ground. Projecting cornices on these rowhouses hide the top of the stack from street level. What looks fine from the sidewalk can be a crumbling wash when you’re standing at the roof.
Pricing for Chimney Cap & Crown in Crown Heights, NY
A typical cap installation in Crown Heights runs roughly $250 – $550 for a standard single-flue cap, with multi-flue caps on shared stacks running $600 – $1,200 depending on the number of flues and the size of the opening. Crown coating typically runs $400 – $800. A full crown repair or rebuild, where the old wash has to come off and be re-poured, usually lands between $800 and $1,800. Those are estimates for this market, and they reflect the extra work a shared party-wall stack adds.
The written estimate sets the final price, and the estimate itself is free. Camera inspection is part of it, with the photo report included so you can see what we’re pricing before you agree to anything.
See the difference
Before
After
Before
After
Before
AfterWe Also Serve Cities Near Crown Heights
The same housing stock spills across the surrounding neighborhoods, and we take cap and crown calls throughout East Flatbush, Williamsburg, Prospect Heights, and Bedford-Stuyvesant. Plenty of those calls come from people who found us while searching for chimney work in Crown Heights, and the job is the same rowhouse chimney wherever it sits. If your building is just outside the neighborhood, call and we’ll confirm coverage.
Serving Crown Heights, NY – Our Local Coverage Area
We serve Crown Heights and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Crown Heights
Usually yes, at least informally, because the cap serves flues belonging to more than one unit. In these attached rowhouse blocks, coordinating with neighbors is a routine part of the job rather than an exception. We’ll explain what the cap covers and what it doesn’t so you can have that conversation with a clear picture. Call (855) 337-1157 and we’ll walk through it.
Crumbly is rarely just cosmetic on a stack that age. Once the crown spalls and cracks, water gets behind it and starts degrading the clay tile joints in the flue below. Whether yours needs a coating or a full rebuild depends on how deep the cracking runs, and that’s something we show you on camera rather than describe over the phone.
Yes, and arguably more so, because gas boiler exhaust produces condensation that attacks masonry joints from the inside. A cracked crown lets water in from the top while the boiler adds moisture from below. In Crown Heights, most of the flues we look at vent heating equipment rather than fireplaces, so the inspection is really a venting check. Call (855) 337-1157 for an exact quote; estimates are free.
You ask to see the evidence, and any honest company will show you. Nothing gets recommended here without camera footage of your own flue and smoke chamber that you can watch and question. If a crown can be coated rather than rebuilt, we say so, and we’ll tell you plainly when work can safely wait.
A coating seals an intact but porous crown; a full repair rebuilds a crown that has cracked through or lost its slope. The difference is structural, not cosmetic. We camera-inspect first, measure how far the damage goes, and quote the smaller job when the smaller job will actually hold.
The Shared-Stack Reality of Crown Heights Chimney Work
Here’s what makes this neighborhood different from most. In the attached rowhouse blocks, a chimney is rarely solo. A single stack often carries the boiler flues of three or four units through party walls, which means one deteriorated flue or one loose cap can push moisture and exhaust into a neighbor’s apartment through the common chimney. That’s why shared-stack inspection and neighbor coordination are part of the routine here, not an afterthought.
On a typical Crown Heights rowhouse, the crown has spalled from decades of freeze-thaw, and the original clay tile liner has deteriorated joints from years of moisture and gas boiler exhaust. A qualified local pro typically runs a camera through the flue to show the homeowner the liner and smoke chamber, then rebuilds or coats the crown with a flexible sealant and sets a properly sized multi-flue cap with a spark arrestor and animal screen, sealing the flashing where the chimney meets the roof.
Crowns on 1890s – 1930s stacks crack and spall from freeze-thaw, letting water into the flue and degrading the clay tile joints that serve gas boiler flues. Original liners in converted coal-to-gas flues are often sized wrong for modern boiler exhaust, which causes condensation and joint deterioration a cap alone won’t fix. A missing or loose cap on one unit lets rain, birds, and debris into a neighbor’s flue through the common chimney. All of that gets worse through the cold, damp Northeast winters, when heating equipment runs hard from November through March and stress-tests every joint and coating.
This is where the worst upselling in the trade happens. Someone gets told they need thousands in liner or masonry work with no way to verify it. We won’t do that. Every recommendation comes with camera footage you can see for yourself, and if the crown can wait a season, we’ll tell you it can wait.
What Happens When You Call
We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, closed Saturday. A call outside dispatch hours gets booked into the next opening. Same-day repair is often possible, and the estimate is free with the written price set per job before any work begins.
Cap and crown problems on a Crown Heights stack don’t announce themselves. By the time a crown looks crumbly from the roof line, water has usually been working on the liner joints for a while. Book the inspection, watch the camera footage, and decide with real evidence in front of you. Call (855) 337-1157 for a free estimate and we’ll get your Crown Heights chimney scheduled.
Written by the team at Chimney Sweep Bushwick.