Gas fireplace service
Sweep & inspection
Caps & crowns
Flue relining
Masonry repairLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Why Bushwick Homeowners Choose DuraFlex Chimney Cleaning
We provide independent DuraFlex chimney cleaning service in Bushwick, which means we inspect, sweep, and service stainless flexible liner systems installed in this neighborhood’s older masonry chimneys. What makes our DuraFlex work different is that we treat the liner as the working part of the chimney, not a background detail: we inspect the liner’s interior surface, its seams, its insulation wrap, and the top plate, then clean and report on all of it. Most sweeps run a brush down and hand you a receipt. We come back with a diagnosis you can act on.
DuraFlex is a flexible stainless steel chimney liner system, and it turns up in Bushwick for a good reason. The housing stock here is dense brick walk-ups and tenements from the 1880s to the 1920s, built around coal flues that were never designed for what came later. A flexible liner lets a technician reline a flue that has bends, offsets, or an odd cross-section without tearing the chimney apart. That matters in a three-story walk-up where nobody wants demolition.
We’re clear about who we are. Chimney Sweep Bushwick is an independent DuraFlex service provider. We are not affiliated with, authorized by, or certified by DuraFlex, and we don’t sell DuraFlex equipment. We service it, clean it, and repair it with quality parts that fit it.
Our technicians have up to 10 years of experience with liner systems and the masonry chimneys they go into. Every job starts with a Level 2 inspection, and nothing gets recommended without camera evidence you can look at yourself. To book a DuraFlex service in Bushwick, call (855) 337-1157. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Trust Chimney Sweep Bushwick for Your DuraFlex Chimney Cleaning?
Trust in this trade comes from knowing what a liner actually does under load, and ours is built on repetition. Our technicians have cleaned and serviced flexible stainless liner systems through enough heating seasons to recognize the difference between normal surface staining and the early corrosion that means a seam is starting to fail. That distinction protects your liner and your wallet. A sweep who doesn’t know the difference scrubs the surface and misses the problem.
We keep quality parts that fit DuraFlex equipment on hand from our supplier relationships, matched to the liner’s dimensions and connection points. Fit is the whole ballgame on a flexible liner. A top plate that doesn’t seat correctly lets water in, and water in a stainless flue is where expensive problems begin.
Warranty-safe service is part of the deal. Flexible liner warranties typically hinge on proper installation and on the liner not being physically abused during cleaning. We sweep with the liner’s construction in mind: appropriate brush type, controlled tension, no forcing a round brush through an oval run. We document what we find with photos so you have a record. The service we perform is designed to preserve the integrity of the system, not void it. Our full scope covers chimney sweep, cap and crown, chimney repair, fireplace repair, and chimney inspection, so the same specialist crew can follow the liner from diagnosis through repair.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common DuraFlex Chimney Cleaning Problems We Fix in Bushwick
These are the failure modes we actually encounter on flexible stainless liner systems in Bushwick’s older brick chimneys. Each one has a cause, and each one has a reason it shows up in this neighborhood specifically.
- Corrosion at the liner seams from acidic flue gases. Flexible stainless liner seams are the most vulnerable point on the system. When a flue serves a gas boiler or an oil-fired appliance, the exhaust condenses on the cooler stainless surface and forms acidic moisture that eats at seam welds over time. In Bushwick, this is compounded by the repurposing problem: landlords dividing units often vent a new gas boiler or water heater into an abandoned coal flue. An unlined flue serving a gas appliance is a classic find here, and if a flexible liner has been run through, it may not be rated for that appliance’s condensate. We check appliance-to-liner compatibility before we ever put a brush in.
- Top plate and cap loosening from thermal cycling. A liner’s top plate seals the chimney opening at the roof. Through freeze-thaw cycles and Nor’easters off the Atlantic, the metal expands and contracts against the masonry and the sealant bond weakens. Once the plate lifts, rain and meltwater run straight down the outside of the liner or into the flue, soaking the insulation wrap and the surrounding brick. Bushwick’s rowhouse party-wall chimneys often go decades without crown or cap maintenance, so a loose plate on an already-compromised crown is a common combination. Cap replacement and crown repair are two of our named specialties for exactly this reason.
- Insulation wrap deterioration reducing draft and allowing exterior creosote. The insulation wrap around a flexible liner keeps flue gases hot, which is what produces a reliable draft. When the wrap degrades, the liner runs cooler, draft weakens, and creosote starts condensing on the liner’s exterior surface, in the annular space between the liner and the masonry. That creosote is invisible from the firebox and dangerous from a chimney-fire standpoint. It’s one of the reasons a Level 2 inspection with a camera is worth doing even when the fire seems to be drawing fine.
- Liner crimp or joint separation from settling or improper installation. Old brick chimneys move. In a 100-year-old tenement, the structure shifts with freeze-thaw and with the settling that comes from decades of water intrusion. A flexible liner that was properly crimped and joined at installation can separate at a joint when the chimney shifts beneath it. Improper installation, where a joint wasn’t fully crimped or was forced around an offset, fails sooner. A separated joint leaks flue gases into the masonry cavity and lets creosote collect where nothing can reach it with a brush. We look for this on every DuraFlex service, using the camera before the brush.
- Creosote odor and reduced draft after a few seasons of use. A homeowner with a DuraFlex 316L liner might notice a strong creosote smell or a fire that’s harder to get going than it used to be. Inspection often reveals degraded insulation wrap or a separated joint allowing creosote to accumulate behind the liner. The typical fix involves removing the damaged section, cleaning the flue thoroughly, and reinstalling a new insulated liner segment with proper top plate sealing. That’s how this kind of job usually goes.
Bushwick adds its own wrinkle to all of it. The neighborhood’s chimney stock is almost entirely 1880s-1920s brick tenements and row houses built for coal, so most flues were abandoned, left unlined, or vented into by later appliances. Any cleaning or relining job here runs straight into NYC’s unusual fire-code reality: most of the wood-burning fireplaces and wood stoves in the neighborhood are legally non-conforming in R6 apartment buildings. That makes every DuraFlex job here part cleaning, part code triage. We tell you what is legally usable and what isn’t, honestly, before we recommend any repair.
DuraFlex Parts & Our Repair-vs-Replace Approach
Parts selection on a flexible liner is not one decision, it’s two. For critical connections like top plates and caps, OEM replacement components are preferred, because those parts must match the liner’s dimensions exactly to seal and stay sealed. A top plate that’s close but not right is a leak waiting for the first hard rain. For minor repairs, high-quality aftermarket clamps and fasteners can be entirely suitable and hold up fine. We make that call part by part, not in a single blanket statement.
On repair versus replacement, we’re straight with you. If the liner itself is compromised by corrosion at the seams or by a joint failure, replacing that section is usually more reliable than trying to patch it. Stainless that has begun to corrode at a seam is thin and getting thinner. A patch on a failing seam buys time, not a fix. If the problem is a loose top plate, a degraded cap, or a section of insulation wrap that can be renewed without disturbing the liner, repair is the right answer and we say so.
Every recommendation is backed by photos from the camera inspection. If work can safely wait, we tell you that too. Call (855) 337-1157 and we’ll set up an inspection so you can see what we see before you spend anything.
Our DuraFlex Service Process – Step by Step
- 1
Level 2 inspection and diagnosis. We start with a camera inspection of the flue and liner, checking the liner’s interior surface for seam corrosion, looking for joint separations, and inspecting the insulation wrap and annular space from the top and the firebox. We verify what appliance the liner serves, because a gas appliance retrofitted into an old coal flue changes what we’re looking at. You get photos and a written diagnosis before anything else happens.
- 2
Repair or section replacement. If the top plate has lifted or the cap has loosened, that gets corrected with a properly fitted replacement. If a liner joint has separated or a section has corroded, we remove the damaged segment, sweep the flue completely, and reinstall a new insulated liner segment, sealing the top plate correctly. The brush always follows the camera, never the other way round.
- 3
Test and draft verification. Once the repair is in place, we verify draft and check for any leaks into the masonry cavity. We confirm the cap and plate seal against water, and we photograph the finished work so there’s a record.
- 4
Warranty documentation. We give you written documentation of what was found, what was done, and what parts were used, in a form you can hold onto for warranty purposes. If a future service call happens with a different provider, that record is what protects you.
See the difference
Before
After
Before
After
Before
AfterDuraFlex Products We Service & Install in Bushwick
We service and install the main configurations of the DuraFlex flexible stainless liner system. That includes the DuraFlex 316L Stainless Steel Liner Kit, which is the liner configuration suited to wood-burning appliances and the one we most often see in residential fireplace chimneys. We also work with the DuraFlex 304L Stainless Steel Liner, a lighter-duty stainless configuration used in certain service applications. The DuraFlex Insulated Liner Kit is the wrapped configuration used where draft and clearances demand it, and the DuraFlex Oval Liner is the oval-profile choice for rectangular or tight flues where a round liner won’t fit.
On top of the liner itself, our DuraFlex service covers the components that make the system work: top plates, caps, and the insulation wrap. Cap replacement and crown repair are named specialties of ours because moisture is the leading cause of long-term chimney deterioration, and the cap and crown are where moisture gets in. We don’t claim to stock DuraFlex equipment and we don’t sell it. We service what’s already in your chimney and install liner systems on relining projects.
We Also Service These Brands
DuraFlex is one part of a broader toolkit. We also work with HeatShield, a resurfacing system for restoring flue integrity without full liner replacement, and Gelco, along with Olympia Chimney, Famco, and Copperfield. That multi-brand capability means our recommendations follow the condition of your chimney, not a single product line. If HeatShield resurfacing is the honest answer for a deteriorating flue, we’ll say so; if a flexible reline is the right call, we have those materials too. One specialist crew handles inspection, sweep, cap, crown, and repair.
FAQs – DuraFlex Chimney Cleaning Service in Bushwick
No. Chimney Sweep Bushwick is an independent DuraFlex service provider and is not affiliated with, authorized by, or certified by DuraFlex. We service and install flexible stainless liner systems using quality parts that fit them, and we don’t present ourselves as a DuraFlex dealer.
Yes. We source quality parts that fit DuraFlex liner systems, preferring OEM replacement components for critical connections like top plates and caps, where exact fit is a safety issue, and using high-quality aftermarket clamps and fasteners where those hold up fine for minor repairs. We match the part to your liner’s dimensions rather than forcing a generic fit.
A DuraFlex stainless steel liner should be cleaned annually if it serves a wood-burning appliance, and inspected at least once a year regardless of fuel type. In Bushwick, the brief but intense heating season means long idle periods where neglected flues crack and debris accumulates, so an annual inspection matters here. A Level 2 inspection with a camera is the way to confirm the liner’s actual condition. Call (855) 337-1157 to get yours scheduled.
It depends on what’s damaged. A loose top plate, a degraded cap, or a section of insulation wrap can often be repaired. If the liner itself is compromised by corrosion at the seams or by a joint failure, replacing that section is usually more reliable than a patch. We make the call based on camera evidence you can see, and we tell you when work can safely wait. Call (855) 337-1157 for a free estimate on either path.
Acidic flue gases condensing on the stainless surface are the leading cause. When a gas boiler or oil-fired appliance vents into a liner, the condensate forms acidic moisture that attacks the seam welds. In Bushwick, abandoned coal flues vented into by later appliances make this worse. An unlined abandoned flue serving a gas appliance with no liner, or with a liner not rated for that appliance, is an immediate carbon monoxide hazard, and we check compatibility on every service.
Flexible stainless liner systems are commonly used to reline a flue for a fireplace insert, and an insulated configuration is often the right choice for draft and clearance reasons. Whether your specific liner is compatible with your specific insert depends on the appliance’s venting requirements, which is exactly what our Level 2 inspection verifies. We confirm compatibility before recommending anything. Call (855) 337-1157 to discuss your insert.
No. A flexible stainless liner installation involves the liner itself, the insulation wrap, the top plate sealing, and the connection at the appliance, and getting any one of those wrong creates a fire or carbon monoxide risk. It also usually affects the liner’s warranty, since warranties typically hinge on proper installation. This is not work to attempt without training. We install and service these systems as an independent provider.
Most DuraFlex chimney cleaning and inspection visits are completed in a single appointment, with a Level 2 camera inspection, the sweep, and a written diagnosis. A section replacement or a relining job takes longer because the flue has to be cleaned fully and the new segment sealed. Your written estimate sets the scope and the price before any work begins, and nothing is recommended without camera evidence you can review. Call (855) 337-1157 for an exact quote, estimates are free.
We price DuraFlex chimney cleaning per job based on the written estimate, which we provide free after the inspection. Nothing is billed without your approval, and nothing is recommended without camera evidence you can see. Good work on a liner is cheaper than a failed liner. Call (855) 337-1157 for an exact quote; estimates are free.
Book Your DuraFlex Service in Bushwick, NY
Whether you have a DuraFlex 316L liner that hasn’t been looked at in a few seasons, a top plate that’s lifted, or you’re relining an old coal flue in a Bushwick walk-up, we can help. From inspection to repair, handled by the same specialist crew. Call (855) 337-1157. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Bushwick.