Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across East New York
If your chimney crown is cracked or your cap is missing, rainwater is already working its way into the brick and flue tiles, and that damage gets more expensive the longer it sits. Chimney Sweep Bushwick handles cap installation, cap replacement, crown repair, and crown coating for the brick row houses and semi-detached homes across East New York, and we know the building stock here well enough to expect what we’ll find when we get on the roof. From inspection to repair, the same specialist crew handles it. Call (855) 337-1157. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why East New York Homeowners Call Chimney Sweep Bushwick for Chimney Cap & Crown
East New York’s chimneys are old, and that means the person on your roof needs to know what they’re looking at. Most of the housing here went up between 1900 and 1930, and a large share of those chimneys were never relined. When we send a technician to a home in East New York, the job usually means reading a hundred-year-old stack, not just bolting down a cap. Our technicians have up to 10 years of experience, and we diagnose before we recommend: inspection first, always.
We’re a chimney and fireplace specialist, not a general handyman who adds caps to the list. That focus matters in a neighborhood where a furnace, a water heater, and an unused fireplace flue can all share one brick structure. Every recommendation we make comes with camera footage or photos you can look at yourself. If the crown can wait a season, we’ll tell you that too. We serve East New York and the blocks around it, and we book work Sunday through Friday, 7am to 7pm.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in East New York
Cap and crown work is moisture defense, and moisture is the leading cause of long-term chimney deterioration. In East New York’s row houses, water gets in at the top and travels down through the brick and mortar. Here’s what we do about it.
Cap Installation in East New York
A properly sized cap keeps rain, snow, and animals out of the flue while letting exhaust escape. On East New York’s semi-detached homes we measure the actual flue opening rather than guessing, because a cap sized for one flue on a chimney that serves two appliances causes draft problems and can push exhaust back into the house. We work with Olympia Chimney and Famco caps that fit the stack you have.

Cap Replacement in East New York
Rusted dampers and corroded caps are common on brick row houses here, especially where a chimney has been venting a furnace or water heater for years. A cap that’s lost its mesh or pulled loose from its legs isn’t protecting anything. We remove the old unit, check the flue top for damage, and fit a replacement that matches the appliance load the chimney actually carries.

Crown Repair in East New York
The crown is the concrete or mortar cap at the very top of the chimney, and it’s the part that fails first. In East New York’s single-wythe brick chimneys, a crown that has cracked and separated from the flue lets water soak straight into the masonry, and winter freeze-thaw cycles then spall the mortar joints and flue tiles. We rebuild crowns that have pulled away, matching the overhang so water sheds clear of the brick.

Crown Coating in East New York
When the crown is sound but its surface has gone porous, a flexible crown coating seals it without demolition. This is a good fit for the mortar crowns on 1920s and 1930s houses that were never designed for the volume of modern furnace venting. For flues with interior deterioration, our HeatShield resurfacing can restore integrity without pulling the whole liner. You can read more about the full range on our chimney cap & crown page.
Multi-Flue Cap and Custom Cap Work
Many East New York chimneys serve more than one appliance, and a stock cap won’t cover them correctly. We build and fit multi-flue caps and custom caps sized to the full footprint of the stack, which is often the difference between a chimney that drafts and one that smokes back into the house.
Trusted Brands We Service in East New York
We work with an industry-vetted brand portfolio: DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. That means caps, crowns, and liners are professional-grade materials, not whatever’s cheapest at a hardware store. DuraFlex flexible liner systems let us reline a chimney with minimal disruption to the masonry, which matters in tightly built row houses where tearing out brick is the last thing anyone wants. HeatShield resurfacing gives us a way to restore a deteriorating flue without full replacement. We schedule the work promptly and keep the job to what the camera shows is needed.
Common Chimney Cap & Crown Problems We See in East New York Homes
- Cracked crowns that have separated from the flue. Water enters at the gap and accelerates spalling in shared brick chimneys. On a hundred-year-old stack, one bad winter of freeze-thaw can turn a hairline crack into missing mortar.
- Caps sized for one flue on a chimney that serves two appliances. East New York row houses often vent a furnace and a water heater into the same structure. An undersized cap restricts draft and can allow cross-contamination between units.
- Mortar crowns never designed for modern furnace venting. The original crown on a 1915 house was built for a coal fire, not a gas furnace running year-round. The result is rusted dampers and deteriorated smoke chambers.
- Unlined or clay-tile flues with offset runs. Many local chimneys were never relined, and the flue tiles that are there have often cracked. A camera inspection is the only way to see it.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Cap & Crown in East New York, NY
Cap and crown work is priced per job, and the written estimate sets the final price. Typical ranges in East New York look like this: a standard single-flue cap installation runs $250 to $550; a multi-flue or custom cap runs $450 to $1,200 depending on the footprint; crown repair runs $350 to $900; and crown coating runs $300 to $650. What moves the number is access to the roof, the condition of the brick at the top of the stack, and whether the inspection turns up a flue problem underneath. We inspect first, show you what we find, and put the estimate in writing before any work starts. The estimate is free.
We Also Serve Cities Near East New York
We work across the surrounding neighborhoods as well, including Cypress Hills, Brownsville, East Flatbush, and Bedford-Stuyvesant. The housing stock doesn’t change much block to block, so the same inspection-first approach applies whether you’re just over the line in Cypress Hills or further out toward Brownsville. Call and we’ll book you into the next opening.
Serving East New York, NY – Our Local Coverage Area
We serve East New York and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in East New York
You can’t tell reliably from the ground or from inside your own unit; a camera inspection is the only reliable way to confirm it. In East New York’s early-1900s row houses, chimneys are frequently shared between adjacent units, and a common pattern is that one side has been relined while the other remains unlined. We run a camera through the flue to map which appliance feeds which stack before recommending any cap or crown work. Call (855) 337-1157 for an exact quote, and estimates are free.
Because a crown can look intact from 30 feet away and still be cracked, porous, or separated from the flue where you can’t see it. On these old single-wythe brick chimneys, the gap between crown and flue is exactly where water gets in, and freeze-thaw does the rest. We won’t tell you a crown needs work without showing you the photo or video. Call (855) 337-1157 for an exact quote, and estimates are free.
It needs to be sized to the full flue opening, not to a single appliance, which usually means a multi-flue or custom cap. A stock cap sized for one flue on a two-appliance chimney restricts draft and can cause cross-contamination between units. We measure the actual opening and fit the cap to it. Call (855) 337-1157 for an exact quote, and estimates are free.
Only a camera inspection will tell you; the age and exterior of the chimney aren’t enough to go on. A house built between 1900 and 1930 in East New York may have original clay tile, cracked tile, or no liner at all, and offset flues are common. We scope the flue, show you the footage, and tell you plainly if relining can safely wait. Call (855) 337-1157 for an exact quote, and estimates are free.
Yes. Salt air and driving rain from nor’easters accelerate exterior deterioration, and a properly fitted cap keeps the weather out of the flue while still allowing exhaust to escape. Combined with a sound crown, it’s the first line of defense for a brick chimney in this part of Brooklyn. If water is already getting into the masonry, we’ll find it with the camera before recommending anything. Call (855) 337-1157. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Book Your Cap or Crown Inspection in East New York
Nothing gets recommended without camera evidence you can see for yourself, and we’ll tell you when work can safely wait. If your crown is cracked, your cap is missing, or you’ve never had the top of the chimney looked at, call (855) 337-1157 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Bushwick.