Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across East Flatbush
If you own a semidetached or row house in East Flatbush, your chimney cap and crown are doing more work than you probably realize. They keep rain off the flue, they hold the brick and mortar together at the top of the stack, and they take the brunt of every freeze-thaw cycle this part of Brooklyn gets. We work on these chimneys regularly, and we know how the older stacks along Utica and Church Avenues are built, how the shared party-wall lines run, and what a fail at the top of one of them actually means for both sides of the wall. Call (855) 337-1157 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why East Flatbush Homeowners Call Chimney Sweep Bushwick for Chimney Cap & Crown
We specialize in chimney and fireplace systems and nothing else. That focus matters when the job is a crowned, capped party-wall stack on a 1920s row house, because the person diagnosing it needs to read the brick, the mortar, the flue tile, and the flashing at the same time. We inspect before we recommend. Always.
Local property owners call us because our answers are specific, not salesy. When you book with our chimney cap & crown team, you get a camera inspection and a photo report you can look at yourself, and a flat price agreed before we book the sweep. Nothing gets recommended that isn’t shown to you on a screen first. If your crown can wait another season, we’ll tell you that too.
We serve East Flatbush and the neighborhoods around it, and we know the housing here. The blocks of brick and frame semidetached houses, the two- and three-story rowhouses, the converted coal and oil flues that are still unlined or lined with clay tile that has cracked. We also work across East Flatbush on the same shared-stack conditions from block to block. Our technicians have up to 10 years of experience.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in East Flatbush
Your chimney crown and cap are the two pieces most likely to fail on an East Flatbush house before anything else does. Here’s how we handle each one.
Cap Installation in East Flatbush
A properly sized cap keeps rain, birds, and squirrels out of the open clay tile flue, which matters in a neighborhood with mature street trees that stay damp in the summer. On paired semidetached blocks, we measure the exact flue count on both sides of the shared stack so the cap fits your side without blocking your neighbor’s draft. We install caps from Olympia Chimney and Famco, sized to the flue, not the box-store default.

Cap Replacement in East Flatbush
An undersized or rusted-through cap is one of the most common things a Level 1 inspection picks up on these older houses. Birds and squirrels nest in the gap, the debris stays damp, and draft drops while fire risk climbs. We replace caps on the same visit whenever the flue opening is already accessible, so you’re not booking twice for a job that fits in one stop.

Crown Repair in East Flatbush
That spalled, cracked wash of mortar at the top of the stack is the source of most water damage we find in East Flatbush chimneys. Decades of coastal Northeast freeze-thaw cycles chew through soft brick and mortar crowns on these 1900s to 1930s chimneys. Crown repair means rebuilding or patching the crown wash so water sheds away from the flue instead of tracking down alongside it. On a shared party-wall stack, we document the crown on both sides with the camera so you and your neighbor understand the scope before anyone signs off.

Crown Coating in East Flatbush
On a crown that’s intact but porous, a coating seals the surface and slows future freeze-thaw damage. It’s the right call when the mortar is sound and the cracks are surface-level, and the wrong call when there’s cracked mortar underneath, because coating over a failing crown traps moisture and speeds up the interior flue deterioration you were trying to prevent. Our camera inspection tells us which scenario you’re in before we quote a coating, using Copperfield and HeatShield materials where the repair needs resurfacing rather than a simple seal.
How a Shared Party-Wall Stack Changes a Cap or Crown Job in East Flatbush
Most cap and crown work elsewhere is a one-house decision. In East Flatbush it often isn’t. On the paired semidetached blocks, the chimney stack straddles the party wall, which means a crown coating or a multi-flue cap physically involves your neighbor’s flue as well as yours. Some crews find this out halfway through the job. We don’t. We inspect both sides of the stack with a camera before we schedule a repair, document the crown, cap, and flue condition on the shared structure, and coordinate with the next-door owner so there are no surprises and no soot or creosote crossing into a flue that wasn’t on the paperwork.
On a typical early-20th-century semidetached row house, the original brick crown has spalled from decades of freeze-thaw cycles, leaving the clay tile flue top exposed and water running down alongside the liner. Because the stack serves both sides of the party wall, a qualified technician starts with a Level 2 camera inspection documenting both sides, then repairs or coats the crown, seals the flashing, and installs a properly sized multi-flue cap that fits the shared stack without pinching the neighbor’s draft. That’s a slower job on paper, and a cheaper one in the end.
Trusted Brands We Service in East Flatbush
We work with professional-grade materials from a vetted brand portfolio, including Olympia Chimney, Famco, and Copperfield. We’re not a hardware-store sweep fitting whatever cap is on the shelf that day. What we install is sized to your flue, rated for the load, and specific to the chimney we inspected. We don’t stock parts locally, but our turnaround on cap and crown work is fast once the camera inspection is done, and the written estimate sets the price before we lift a tool.
Common Chimney Cap & Crown Problems We See in East Flatbush Homes
- Spalling brick and a failing mortar crown on the shared stack. Water gets into the shared flue and shows up as damp patches or white efflorescence on the chimney breast inside one or both homes. Both sides need to be inspected before anyone assumes the leak is coming from one owner’s side.
- Missing or undersized caps on the open clay tile flue. Birds and squirrels nest in the opening, and the summer humidity here keeps debris damp, which cuts draft and creates fire risk. A Level 1 inspection flags it in minutes.
- Crown coating applied over cracked mortar or a failing crown wash. Moisture gets trapped, freeze-thaw damage speeds up, and the interior flue deteriorates underneath a coating that looks fine from the roof. This is the failure mode that a camera inspection catches and a surface-level job misses.
- Unlined or degrading clay tile flues on converted furnaces and boilers. Many of these chimneys originally served coal, then oil, and now vent appliances they were never designed for. The crown gets the blame, but the flue inside is the reason it fails.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Cap & Crown in East Flatbush, NY
Our pricing is per job, set by the written estimate, and the estimate is free. These are typical ranges for the East Flatbush market:
- Cap installation (single flue): typically $180 – $340 depending on flue size and cap style.
- Cap replacement, including removal of the old cap: typically $220 – $380.
- Multi-flue cap for a shared party-wall stack: typically $450 – $900, depending on flue count and party-wall coordination.
- Crown coating: typically $300 – $600, on a crown that’s intact and porous.
- Crown repair or rebuild: typically $600 – $1,400, depending on how much of the crown wash has to come out.
- Custom cap: typically $700 – $1,500, based on measurements taken during inspection.
What drives the number up is the state of the crown, the flue count on the shared stack, and whether the flashing needs to be reworked. What doesn’t drive it up is guesswork, because nothing gets quoted until the camera has been in the flue and you’ve seen the footage. If your crown can safely wait another season, we’ll tell you so. Call (855) 337-1157 for an exact quote.
We Also Serve Cities Near East Flatbush
We also serve the neighborhoods around East Flatbush, including Crown Heights, Brownsville, Bedford-Stuyvesant, and Williamsburg. The housing stock across these areas is often the same age and the same shared-stack construction, so the inspection approach carries over. If you’re outside East Flatbush, call and we’ll confirm coverage and book the sweep.
Serving East Flatbush, NY – Our Local Coverage Area
We serve East Flatbush and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in East Flatbush
Yes, and it’s common on these paired blocks, but the cap has to be sized to your flue only so it doesn’t block your neighbor’s draft on the shared stack. We measure the flue count on both sides during the camera inspection, then set the cap to your side. If the crown itself has failed across the party wall, both owners usually need to be in on the decision before we touch that part. Call (855) 337-1157 for an exact quote.
Coating is the right call only when the crown wash is intact and the cracks are surface-level; cracked mortar or a failed crown wash means repair, not coating. Coating over a failing crown traps moisture and accelerates freeze-thaw damage inside the flue. The camera inspection tells us which it is before we quote anything. Call (855) 337-1157 – estimates are free.
Not without a proper inspection first. Unlined or degraded clay tile flues on this age of house were often sized for coal or oil, and a gas boiler vented into one can be a real safety issue if the flue isn’t compatible. A Level 2 camera inspection shows exactly what’s in there; if relining is needed, we install DuraFlex flexible liner systems. Call (855) 337-1157 for an exact quote.
Shared stacks draw differently on each side, usually because one flue has a partial blockage, a failed crown, or an undersized cap that reverses draft under certain wind conditions. On paired blocks, one side can look fine while the other smokes. A camera inspection on both sides settles it. Call (855) 337-1157 – estimates are free.
Yes, because an unused flue still fills with birds, squirrels, damp debris, and rainwater, and the absence of fires doesn’t stop a shared party-wall stack from deteriorating through freeze-thaw cycles. A missing cap is often the reason the crown fails in the first place. The fix is usually inexpensive relative to the damage it prevents. Call (855) 337-1157 for an exact quote.
Book a Free Cap & Crown Estimate in East Flatbush
If your crown is spalling, your cap is missing or undersized, or you’re not sure what’s happening at the top of a shared stack, call us. We’ll bring the camera, show you what’s actually in and on the chimney, and quote from what we see. The estimate is free and the price is set per job in writing. Call (855) 337-1157. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Bushwick.