Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Clinton Hill
If you own a brownstone or rowhouse in Clinton Hill, your chimney cap and crown are doing quiet, constant work against a climate that punishes old masonry. We’re Chimney Sweep Bushwick, and we work on cap and crown systems across Clinton Hill – from the rowhouse blocks near the Brooklyn Navy Yard edge to the tree-lined streets around Pratt Institute and along DeKalb Avenue and Fulton Street. A cracked crown or a rusted-out cap on these buildings isn’t a small cosmetic issue; it’s water finding its way into soft 19th-century brick. Call (855) 337-1157 and we’ll book a sweep or inspection. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Clinton Hill Homeowners Call Chimney Sweep Bushwick for Chimney Cap & Crown
We’re a chimney and fireplace specialist, not a general handyman who happens to own a ladder. That matters on a Clinton Hill rowhouse, where the chimney stack was probably built for coal in the 1840s to 1900s and later adapted to oil or gas. Working on one of these requires knowing how the flues run inside the stack before anyone touches the crown.
Our technicians have up to 10 years of experience with the kind of dense, attached housing that fills Clinton Hill. We’ve worked on plenty of brownstones and Italianate rowhouses where a single party-wall stack serves two or three households at once, and where the cap has to be sized around multiple flues rather than a single pipe. We inspect and diagnose before we recommend, so you get a Level 2 inspection and a clear read on what your crown actually covers before we propose work.
We connect you with independent local professionals who perform the work, and they’re licensed and insured as their state requires. The estimate is free, the price is set per job by the written estimate, and we work with professional-grade materials rather than off-the-shelf hardware.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Clinton Hill
Multi-Flue Cap
Most Clinton Hill brownstones have one stack with two, three, or four separate flues breaking through the same crown. A standard single-flue cap won’t cover that safely. We fit multi-flue caps sized to the actual flue arrangement and check that the flashing seals against the crown edge. If your shared stack serves a neighboring unit too, the cap has to cover every flue opening, not just yours.

Crown Repair
The crown is the concrete or mortar top surface that sheds water away from the brick. On 1840s – 1900s Clinton Hill rowhouses, that crown is usually a thin mortar wash that’s cracked along the party wall after a few freeze-thaw winters. We rebuild the crown so it slopes away from the flue and bonds properly to the stack, restoring the water-shedding it was built for.

Crown Coating
When the crown is sound in structure but has surface cracking, a crown coating seals those hairline cracks before they widen. This is the spot where our HeatShield resurfacing capability comes in – a proprietary system for restoring flue and crown integrity without tearing the whole stack apart. On a Clinton Hill chimney where full demolition isn’t warranted, coating keeps the water out and buys real life from the original masonry.

Custom Cap
Some Clinton Hill stacks aren’t square. A converted mansion or an Italianate rowhouse may have an irregular crown footprint or a flue arrangement that no stock cap fits. We measure the actual crown and have a custom cap fabricated to match. For street-visible work on landmark-review properties, the fit matters for both performance and appearance.
Trusted Brands We Service in Clinton Hill
Our cap and crown work uses professional-grade materials from a set of industry brands we work with: DuraFlex for flexible liner systems if a damaged flue needs relining under a new cap, HeatShield for resurfacing, and Olympia Chimney for caps, venting, and structural components. We don’t stock parts; we order what the job needs and work with what fits your stack. If your existing cap or crown hardware is from a recognized brand, we can match or replace it rather than forcing a different system onto the roof. From inspection to repair, handled by the same specialist crew.
Common Chimney Cap & Crown Problems We See in Clinton Hill Homes
- Crown cracks along a shared party-wall stack. When one unit’s crown fails, water runs into a flue that may serve two or three households, and a single failed crown can send moisture into a neighbor’s chimney. That’s why cap and crown work on these rows is a shared-stack problem, not a single-home one.
- Multi-flue caps clogging fast. Clinton Hill’s dense tree canopy – especially the mature London planes – plus heavy spring pollen drops seed and grit onto cap screens. Once the screen is blocked, draft dies and smoke can back up into adjoining units.
- Spalled brick and failed mortar at the crown edge. Humid freeze-thaw winters here work water into the soft brick right where the crown meets the stack, and that edge crumbles year after year. Street-visible brick repair on these rowhouses may need Landmarks Preservation Commission review before a single brick is replaced.
- Unlined original flues under a loose or rusted cap. Many Clinton Hill chimneys still have their original unlined masonry flues. A loose cap lets rusted screen fragments and debris drop straight down into the smoke chamber and firebox, which then shows up as a blocked flue.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Cap & Crown in Clinton Hill, NY
What you’ll pay for chimney cap & crown work in Clinton Hill depends on the size of the stack, how many flues need covering, and whether the crown needs a coating, a rebuild, or a custom fabrication. Typical estimates in this market:
- Multi-flue cap installation: $375 – $850, depending on flue count and cap material.
- Crown coating: $350 – $700 for a sound crown with surface cracking.
- Crown repair or rebuild: $600 – $1,800, more if the crown edge has spalled brick that needs rebuilding too.
- Custom cap: $700 – $1,500 for an irregular footprint or unusual flue layout.
These are typical estimates, and the written estimate you receive sets the final price. Nothing is recommended without camera evidence you can see for yourself, and if work can safely wait, we’ll tell you. The estimate is free. Call (855) 337-1157.
We Also Serve Cities Near Clinton Hill
We serve homeowners in Fort Greene, Prospect Heights, Williamsburg, and Crown Heights on the same basis – inspection first, professional-grade materials, and a written estimate before any work. If your building is just over the neighborhood line, we can still take a look at the stack and the crown.
Serving Clinton Hill, NY – Our Local Coverage Area
We serve Clinton Hill and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Clinton Hill
Yes, you can cap just your own flue, but the cap has to be sized and flashed so it doesn’t interfere with the shared stack or your neighbor’s flue opening. On a party-wall chimney serving two or three households, capping one flue alone can be done, but we inspect the full stack first to confirm which flues your crown actually covers. Call (855) 337-1157 for an inspection.
It may, if the work is visible from the street. Clinton Hill’s 1840s – 1900s rowhouses fall in areas where exterior chimney work can fall under Landmarks Preservation Commission review, so we flag whether your repair crosses into that before we propose a rebuild. Confirm with your building’s status and the commission. Call (855) 337-1157 to discuss your stack.
Clinton Hill’s dense tree canopy – especially the mature London planes – plus heavy spring pollen drops seed and grit onto cap screens quickly, and once the screen blocks, draft drops. That’s why an inspection after winter is a local necessity here. Call (855) 337-1157 for a cap check.
Crown repair rebuilds a crown that’s structurally cracked or spalled; crown coating seals a sound crown with surface cracks before they widen. We recommend repair when the crown has failed at the party wall or the edge has crumbled, and coating when the structure is intact. Either way, we show you the evidence first. Call (855) 337-1157.
A correct multi-flue cap covers every flue opening in the shared stack and holds intact flashing at the crown edge, so a blocked flue can’t back smoke into a neighbor’s parlor. A Level 2 inspection maps which flues the crown covers and confirms the cap seals the whole stack. Call (855) 337-1157 to book one.
Book Your Clinton Hill Cap or Crown Estimate
Whether your crown has cracked along the party wall, your multi-flue cap is clogged with London plane seed, or you want a custom cap fitted before winter, we’ll start with an inspection and show you what we find. Estimates are free, and you’ll see the camera evidence before anything is recommended. Call (855) 337-1157. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Bushwick.