Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Glendale
If you live in Glendale and your chimney is showing crumbling mortar, a cracked crown, or loose flashing, we can help. We work on the chimneys of this neighborhood constantly, from the tight brick rows off Cooper Avenue to the older semi-detached houses near St. John Cemetery, and we know how these stacks are put together. Most repair jobs here aren’t simple patch work, because the chimney on your house may share a wall or a flue mass with the one next door. That changes how a repair gets planned. Call (855) 337-1157 to set up an inspection.
Why Glendale Homeowners Call Chimney Sweep Bushwick for Chimney Repair
Glendale has a mix of housing that keeps chimney work interesting: early-20th-century brick and frame semi-detached houses, small apartment buildings, and rentals that have sat unused for years. We know this stock, and we know the failure patterns that come with it. A repair on a party-wall stack is not the same job as a repair on a standalone chimney, and we plan for that difference before anyone gets on a roof.
Our technicians have up to 10 years of experience, and the work stays in our lane: chimney and fireplace systems, nothing else. From inspection to repair, it’s handled by the same specialist crew, so you’re not bounced between a sweep and a mason and a roofer. We diagnose before we recommend. That means a Level 2 inspection with camera evidence you can look at yourself, and a written estimate that sets the price before work starts.
Homeowners across Glendale call us because the recommendation matches what the camera shows. If repointing will hold the stack for another decade, we say so. If the flue is cracked through and repointing is just lipstick, we say that too, and we explain why.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Glendale
Every part of the chimney system, one company. Here’s what we handle on Glendale stacks, and where each one tends to come up in this neighborhood.
Mortar Repointing
Repointing replaces the crumbling mortar between bricks before the joints erode far enough to loosen the brick itself. In Glendale’s 1920s – 1950s brick houses, the original mortar has usually taken decades of freeze-thaw cycling, and the joints on the weather side go first. Repointing a typical Glendale stack runs $600 – $1,800 depending on height and how much of the chimney face is affected.

Spalling Brick Repair
Spalling is when the face of a brick pops off, and it’s the stage after failed mortar. Moisture gets behind the brick, freezes, and pushes the surface away. On semi-detached Glendale houses, spalling often shows up on the party-wall side where a neighbor’s flue keeps that masonry damp. We replace the failed brick and address the moisture source, because new brick over a wet wall will spall too.

Chimney Waterproofing
Waterproofing is a breathable sealer applied to the exterior masonry to keep rain out while letting moisture inside the wall escape. It’s the cheapest way to slow the deterioration that cracked crowns and bad flashing start. On Glendale’s dense rooflines, where water runs off one roof onto the next, waterproofing the stack and the crown together is often the repair that actually holds.

Flashing Repair
Flashing is the metal where the chimney meets the roof, and it’s the most commonly skipped repair in tight Glendale rows. When chimneys sit close together, roofers and sweeps often leave the flashing alone because access is awkward. Water gets in at that seam, rots the roof deck, and works down through the masonry. We reflash the joint properly, with new metal and a sealed counter-flashing, so the repair holds at the roofline. For more on our full repair scope, see our chimney repair services.
Trusted Brands We Service in Glendale
We work with professional-grade materials from DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. That means when a flue needs relining, we’re installing a DuraFlex flexible liner sized to the flue, not whatever’s on the shelf. When a flue has lost its inner surface but doesn’t need a full liner, HeatShield resurfacing restores the integrity without demolition. Famco and Olympia Chimney components cover caps, venting, and the structural pieces. We don’t stock parts locally; the right material gets ordered to the job. Fast turnaround, proper material, no off-the-shelf substitutes.
Common Chimney Repair Problems We See in Glendale Homes
The failure modes in this neighborhood repeat. Here’s what we find most often, and why.
- Shared flue walls in semi-detached houses. When two units vent into a common masonry mass, creosote and moisture migrate across the party wall. A single-unit inspection misses the damage on the other side, and a repair on one side can change draft on both.
- Original unlined clay-tile flues from the 1920s – 1950s. Freeze-thaw cracking opens gaps in the tile, and creosote builds up in stages that repointing alone won’t fix. A cracked flue needs a liner, not new mortar on the outside.
- Cracked crowns and caps from humid summers and freeze-thaw winters. The crown is the concrete top of the chimney, and it takes the worst of the weather. Once it cracks, water runs down inside the stack. The neighborhood’s dense tree canopy also loads caps and spark arrestors with leaves before the first heating season.
- Skipped or badly done flashing in tight roof access. When chimneys sit shoulder to shoulder, the flashing seam gets ignored. Water then degrades the crown and masonry from the top down, and by the time it shows inside, the damage is well along.
See the difference
Before
After
Before
After
Before
AfterWhat a Shared Stack Means in Glendale’s Semi-Detached Houses
This is the part of the job that’s specific to Glendale and easy to get wrong. The neighborhood’s semi-detached and row houses often share chimney stacks, or have flues that vent into one common masonry mass. A repair on one side of a party wall can change how the other side drafts. Worse, a neighbor’s appliance venting into the same stack can push flue gases, moisture, and creosote across into your flue, and the only way to catch it is to inspect the whole assembly, not just your half. A crack you can see on your side may have a matching one behind the shared wall. That’s why we treat party-wall stacks as one system, and why we tell you when the neighbor’s side needs a look too.
Take a typical job on one of these attached brick houses. It often starts when a homeowner notices crumbling mortar joints or a cracked crown on a stack that abuts the neighbor’s roofline. The usual cause is decades of freeze-thaw cycling on original clay-tile flues and unlined brick, made worse by shared flue walls that let moisture and creosote migrate between the two units. A qualified local pro runs a Level 2 inspection, repoints the spalling brick, replaces the crown and flashing, and may recommend HeatShield or DuraFlex to restore the flue without rebuilding the whole stack. Doing it right means addressing the shared side at the same time, or the repair won’t hold.
Pricing for Chimney Repair in Glendale, NY
Chimney repair in Glendale isn’t a single price, because the work ranges from a repoint to a rebuild. Here are the ranges we quote most often in this market, as estimates. The written estimate always sets the final price.
| Repair type | Typical Glendale range |
|---|---|
| Mortar repointing (partial face) | $600 – $1,800 |
| Tuckpointing (selective joints) | $500 – $1,400 |
| Chimney crown replacement | $700 – $2,000 |
| Flashing repair | $400 – $1,100 |
| Chimney waterproofing | $350 – $900 |
| Chimney rebuild (full stack) | $4,000 – $12,000 |
What moves the number: stack height, access between adjoining chimneys, whether the repair is on a party wall, and whether the flue needs a liner after the brick is fixed. On dense Glendale rows, roof access alone can add time. We don’t recommend work without camera evidence, and we’ll tell you when a repair can safely wait. Call (855) 337-1157 for a free estimate.
We Also Serve Cities Near Glendale
We cover the neighborhoods around Glendale as well. That includes Glendale, Ridgewood, Middle Village, Maspeth, and Bushwick. The housing stock across this stretch is much the same: tight rows, shared stacks, older brick. So the same shared-flue and party-wall checks apply when we inspect a chimney in any of these areas, and we schedule the job the same way.
Serving Glendale, NY – Our Local Coverage Area
We serve Glendale and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Glendale
It’s not safe as a permanent arrangement unless the two flues are properly separated and each vents correctly, and the shared stack should be inspected as one system. A shared masonry mass lets flue gases, moisture, and creosote cross between units, and a furnace and a fireplace venting into the same stack can interfere with each other’s draft. We inspect both sides of the party wall and check the flue separation before recommending anything. Call (855) 337-1157 for a free estimate.
You know by inspecting it, not by looking at it. A capped flue that’s sat unused for years can still hold cracked tile, spalling brick, or a blocked flue from debris and nesting material, and relining over a damaged flue wastes money. A Level 2 inspection with camera footage shows what’s actually inside, in the common rentals along the 11385 corridor as anywhere else. We diagnose first and put the evidence in front of you. Call (855) 337-1157 for a free estimate.
Tuckpointing repairs selected mortar joints; rebuilding replaces the failed section of the stack, sometimes the whole chimney above the roofline. Tuckpointing is right when the brick itself is sound and only the mortar has failed, which is often the case on a 1930s Glendale chimney that hasn’t gone soft. Rebuilding is right when the brick is spalling or the stack has lost integrity and mortar alone won’t hold it. The camera and a close look at the brick decide which one you need. Call (855) 337-1157 for a free estimate.
A cracked crown and loose flashing should be repaired before the next wet season, not left until fall. Water runs in through both, and freeze-thaw will widen the crack and rot the roof deck behind the flashing while the weather keeps working on it. In Glendale’s humid summers and freezing winters, a year of delay usually turns a repoint-and-reflash into a rebuild. That said, we won’t push a job that can safely wait, and we’ll tell you plainly if it can. Call (855) 337-1157 for a free estimate.
An annual inspection is worth doing even without a fire, because the main threats to an unused chimney are water, animals, and settling, not creosote. A capped flue can take on moisture, crack from freeze-thaw, or block with debris, and none of that shows from the ground. On Glendale’s older brick stock, catching a cracked crown or a failed flashing seam early keeps a small repair from becoming a rebuild. We call it a diagnosis-first visit: inspect, show you the evidence, then recommend. Call (855) 337-1157 for a free estimate.
If your Glendale chimney has cracked mortar, a failing crown, or a shared stack you’re not sure about, the next step is an inspection and a straight answer. Call (855) 337-1157. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. The estimate is free, and the written estimate sets the price before any work begins.
Written by the team at Chimney Sweep Bushwick.